| 
| |
|
1-PRODUCTS
|
| |
Are
you manufacturer ?
Yes.
|
|
| |
Where
are you located ?
Our factory is located in the middle-east part
of France, in Montréal La Cluse between
Lyon and Geneva.
|
|
| |
How
and in which materials are your cases manufactured
?
We are specialized in the injection moulding of
thermoplastics. The material used for our cases
are : Polypropylene (PP) for the main part, and
also PMMA, PS and K.Resin.
|
|
| |
How
resistant are you cases ? What are there properties
?
Our cases are made out of Polypropylene , which
is a very resistant material to shocks and main
chemical agents. They have been tested in Laboratory.
They are recyclable and neutral for food ( except
G2 made out of SHOCK PMMA).
|
|
| |
How
resistant are the hinges ?
This
"polypropylene living hinge" principle
has been tested at over 100 000 flexings by the
French National Laboratory with our cases !
|
|
| |
Can
your cases be used for food products ?
Yes , except the G2 made out of SHOCK PMMA.
|
|
| |
Do
you manufacture custom-made cases ?
If you already have a drawing , or an accurate
idea of a new packaging, our R&D department
will study your project and design the mould ,
under reserve that quantities are sufficient enough
to recoup the cost of the mould.
The main activity of GAGGIONE is to design and
manufacture custom-made products
(see our web site : www.gaggione.com
).
|
|
| |
What
are your manufacturing tolerances ?
They are defined in our products specifications.
|
|
| |
Can
I choose a special color for my cases ?
Yes, from about 5 000 pieces (depending on the
size of the case) we realize your case in the
color of your choice (Pantone or RAL).
|
|
| |
Are
your cases anti-static ?
No , but the inside-fitting may be .
|
|
| |
Are
your cases waterproof ?
No.
|
|
| |
|
 |
| |
|
|
|
| |
2-SERVICES
|
| |
PRINTING
|
|
| |
Can
we print on your cases ?
Of course, this is made by silk-screen printing
in our workshop.
|
|
| |
How
do you test the resistance of your silk-screen
printing ?
We
make a "Tear off Test " with an adhesive
tape.
|
|
| |
What
do you need to make our printing ?
Please send us vector files on a floppy disk ,
CD or by e-mail . We use Adobe Illustrator and
need EPS, AI, DXF or IGES files .
Please indicate your pantone color(s) , the size
and the placement of the printing on the case
( a drawing would be fine ! ).
|
|
| |
Do
we have to pay technical costs for every order
?
No they are available for all future orders .
They may be used for another case
(if the printing is identical / same
size).
|
|
| |
Can
we use the same silk-screen on different cases
( sizes) ?
Yes, if the printing is strictly identical.
|
|
| |
Can
you print inside of the case ?
No.
|
|
| |
Can
we print all sides of your cases ?
Lid and bottom can be printed . For the M1, CR700
and CR800 cases, both lateral sides can also be
printed.
|
|
| |
What
is the maximum size for a printing ?
All the plane surface, about 1 cm from the borders
|
|
| |
CUSTOM-MADE INSERTS
|
|
| |
Can
you supply custom-made inserts ?
Yes, from 100 pieces, we can do it in foam or
vaccum-forming . Send us your products and tell
us more about the final use of your case , and
we will send you our best quotation.
|
|
| |
What
kind of insert can you supply ?
•
Foam: egg-shape , stamped , curved to the shape
of your products or drilled in different kinds
of foams (PU,PE) densities and colors.
• Vaccum-formed:
rigid plastic in different materials, thickness
and colors.
|
|
| |
What
do you need to study an insert ?
We prefer to receive your products. Please tell
us also how your cases are going to be used, what
quality you need and if you already have a target
price.
A drawing can be useful but is not necessary.
|
|
| |
What
is the cost of an insert ?
It depends on the material used, on the process
of manufacturing and quantity supplied. We may
give you an estimation upon receipt of your products.
|
|
| |
How
much is a quotation/a prototype for a custom-made
insert ?
We think about it. For the moment it is free.
|
|
| |
Can
an insert be printed ?
Yes, for vaccum-formed insert, we can either engrave
in the mould, or print on the insert itself.
For foam insert, it depends on your request and
on the foam quality.
|
|
| |
How
can we stick the insert ?
With NEOPREN glue or an adhesive tape special
for Polypropylene.
|
|
| |
|
|
| |
|
|
|
| |
3-SALES
CONDITIONS
|
| |
Price
conditions ?
Ex-works
mainly , we can also calculate free-delivered
home, CFR an Harbour, or Airport in France or
abroad.
|
|
| |
What
is your minimum order ?
100 pieces per case/reference.
|
|
| |
|
|
| |
|
|
|
| |
4-DELIVERY
TIME
|
| |
What
is your delivery time (shipment from factory)
?
|
|
| |
•
For Cases
without any personalization in standard color
Until 1 000 pieces,
available on stock.
Above 1 000 pieces : usually within 2 to 3 weeks
upon receipt of order.
•
For printed
cases
Existing printing : 2 weeks upon receipt of order.
New printing : 3 to 4 weeks upon receipt of order
and files.
•
For Cases with insert
Existing : 4 weeks upon receipt of order.
New insert : 5 to 6 weeks upon receipt of order
and approved drawing or foam sample back with
your products.
|
|
| |
|
|
| |
|
|
|
|
|
|
